No products in the cart.

High-Performance
Purpose Built
3 Year Warranty
Headlights

CRAWER Round LED Headlight Pair for Deutz

CRAWER Round LED Headlight Pair for Deutz

Specifications

Brand

CRAWER

Headlight Functions

High Beam, Low Beam

Colour Temp

5500K

Electrical Protection

Radio frequency interference free I CISPR 25 class 4

Finish

Powder-coated aluminum

Harness Connector

H4

Input Voltage

10-32V

IP Rating

IP67

Output

30W Low Beam, 55W High Beam

CRAWER Round LED Headlight for John Deere/Massey Ferguson

Brand

CRAWER

Headlight Functions

High Beam, Low Beam

Colour Temp

5500K

Electrical Protection

Radio frequency interference free I CISPR 25 class 4

Finish

Powder-coated aluminum

Harness Connector

H4

Input Voltage

10-32V

IP Rating

IP67

Output

30W Low Beam, 55W High Beam

Product information

This round LED headlight pair from CRAWER is supplied with two dedicated mounting brackets that adapt the housing for Deutz-Fahr DX and 07 series tractors. Each headlight bolts into its bracket using the factory bolt pattern, with an H4 plug for a fast, plug-and-play connection.

With 55W high beam and 30W low beam output at a cold white 5500K colour temperature, the pair delivers a clear step up from the original halogen units. Three small adjustment screws on each headlight let you set the beam angle for good field visibility without dazzling oncoming traffic on the road.

(See all headlights by clicking here)

Dimensions and installation

  • Diameter (without brackets): 140 mm
  • Lens diameter: 132 mm
  • Depth: 79 mm
  • Bolt spacing: 107 mm, centre-to-centre
  • Connector: H4, plug-and-play
  • Included: two mounting brackets for Deutz-Fahr DX/07 series fitment

Tip: fit the brackets to the tractor first, then slot each headlight in — it keeps the alignment straightforward.

Compatibility

Designed for Deutz-Fahr tractors fitted with the matching brackets included in this set.

  • DX series
  • 07 series

Also suitable for other machines?

The headlight itself uses a common round bolt pattern and H4 connector, and is also sold separately for other applications, but the brackets included in this set are cut specifically for the Deutz-Fahr DX and 07 series and won’t bolt straight onto other tractors.

If you’re running a different tractor, contact us and we’ll point you to the right bracket or headlight for your setup.

Why IP67 sealing and CISPR Class 4 matter

IP67 sealing: A round build-in headlight sits exposed to dust, rain and washdown at the front of the tractor every day, so a sealed IP67 housing means less chance of moisture getting in and shortening the lamp’s life.

CISPR Class 4 EMC: Unsuppressed LED electronics can interfere with the tractor’s radio or onboard electronics. CISPR Class 4 certification confirms this headlight has been tested and won’t cause that interference.

Frequently asked questions

Does this set include the mounting brackets?
Yes, two brackets are included, cut specifically to fit Deutz-Fahr DX and 07 series mounting points.
Can I adjust the beam angle after installing?
Yes. Three small screws on each headlight let you fine-tune the angle for good visibility without dazzling oncoming traffic.
Is it road legal?
Yes, it carries E9 R112 and R10 approval for both high and low beam.
Will this fit other Deutz-Fahr series?
The brackets in this set are cut for the DX and 07 series specifically. For other Deutz-Fahr series, contact us to confirm the right bracket.
[sc_fs_multi_faq
headline-0=”h3″ question-0=”Does this set include the mounting brackets?” answer-0=”Yes, two brackets are included, cut specifically to fit Deutz-Fahr DX and 07 series mounting points.”
headline-1=”h3″ question-1=”Can I adjust the beam angle after installing?” answer-1=”Yes. Three small screws on each headlight let you fine-tune the angle for good visibility without dazzling oncoming traffic.”
headline-2=”h3″ question-2=”Is it road legal?” answer-2=”Yes, it carries E9 R112 and R10 approval for both high and low beam.”
headline-3=”h3″ question-3=”Will this fit other Deutz-Fahr series?” answer-3=”The brackets in this set are cut for the DX and 07 series specifically. For other Deutz-Fahr series, contact us to confirm the right bracket.”
count=”4″ html=”true”]

Why choose this CRAWER round LED headlight pair at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

Getting the headlights and the matching brackets in one order means you’re not left chasing a separate mounting kit after the lights arrive. Order today for a complete, ready-to-fit upgrade on your Deutz-Fahr DX or 07 series tractor.

$407.98 AUD

$370.89 excl. GST

In stock

Part number: Part Nr.: CR-3023-DFS2

Contents of bundle

Product image

CRAWER Round LED Headlight for John Deere/Massey Ferguson x 2

In stock
Product image

Bracket for CR-3023 x 2

In stock
Add to cart

Built for Farmers, by Farmers

Unmatched Support & Reliability

Powerful Performance, Plug & Play Convenience

$407.98

In stock