CRAWER Hyperios LED Headlight Pair for Fendt

This pair of CRAWER Hyperios 90mm LED headlights combines low beam and high beam in one compact unit, and comes complete with two ND2 adapter cables to plug straight into Fendt tractors. Each lamp connects via a Deutsch DT 3-pin plug, with the ND2 cable bridging to the factory Fendt connector — no cutting or splicing.

With a 9-32V input, IP67 sealing and full E-mark approval (R112/R10), the CR-3009 draws 55W with low beam active (which includes the high beam circuit) and 30W on high beam alone. The 90mm housing suits bonnet or roof mounting and is CISPR Class 4 rated so it will not interfere with the tractor’s onboard electronics.

(See all headlights by clicking here)

Dimensions and installation

• Diameter: 90 mm
• Depth: 106 mm
• Bolt spacing: 84.9 mm, centre-to-centre
• Connector: Deutsch DT 3-pin, with ND2 adapter cable included for Fendt

Tip: a 2-pin connector for the optional CR-RES02 CAN-bus resistor is built in. Some Fendt models may need it to clear the 0F.1.05 error code on the console — try the lamps first and only fit the resistor if the code appears.

Compatibility

Designed specifically for Fendt tractors, this set includes the ND2 adapter to match the Fendt harness without any modification.

• Fendt 200 series: S4
• Fendt 500 series: SCR, S4
• Fendt 700 series: SCR, S4, S5
• Fendt 800 series: S4
• Fendt 900 series: S4, S5
• Fendt 1000 series

OEM references: Hella 1AL009998001 / 008191051 / 008193027, Fendt G334900160020.

Also suitable for other machines?

This unit is dimensioned for the standard 90mm headlight housing, but the included ND2 adapter cable is wired specifically for the Fendt harness and will not plug into other brands.

If you are running a Case, Deutz or New Holland tractor, see the CR-3009-ND1S instead. If you are unsure which adapter you need, contact us and we will point you to the right product.

Why CISPR Class 4 and plug-and-play matter

CISPR Class 4 interference suppression: Modern Fendt tractors run a lot of onboard electronics — CANbus, GPS guidance, in-cab displays. A poorly suppressed LED headlight can introduce static or glitches into these systems; CISPR Class 4 certification means this lamp has been tested clean.

Plug-and-play with the ND2 adapter: Because the ND2 cable is matched to the Fendt harness, there is no cutting, splicing or crimping involved. That keeps the original wiring intact and the installation reversible if you ever need to revert to the factory headlight.

Frequently asked questions

Why choose this CRAWER Hyperios LED Headlight Pair for Fendt at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-3009-ND2S gives Fendt owners a complete low beam and high beam LED upgrade in one plug-and-play set. Order today for a factory-style retrofit with no wiring changes.