CRAWER LED Headlight Pair for John Deere R/M Series

This pair of LED headlights is a direct low beam replacement for the factory halogen units fitted to John Deere R and M Series tractors. Each lamp bolts straight into the original headlight opening and connects through the same plug used by the halogen lamp, so there’s no cutting or splicing on either side.

Each headlight in the set runs a 30W low beam LED engine at 5500K, draws on a wide 10-32V input and is sealed to IP67. Fitting the pair together gives you a matched, even light output across both sides of the tractor front.

(See all headlights by clicking here)

Dimensions and installation

• Width (each lamp): 100 mm
• Height (each lamp): 112 mm
• Depth (each lamp): 99 mm
• Connector: identical to the original John Deere halogen plug on both sides — no tools needed

Tip: measure both headlight openings before ordering to confirm the new housings will sit flush.

Compatibility

Designed for John Deere R and M Series tractors, replacing the original left and right low beam units fitted at the factory.

• Original part numbers replaced: AL209451, RE288372, RE288373, RE305675, RE305676, RE346166, RE346167, RE563608, RE563609, RE587449, RE587450

Also suitable for other machines?

This set is dimensioned for the John Deere R/M Series headlight openings and uses the matching factory connector on both lamps, so it is built specifically for that fitment.

If you’re running a different tractor and want a comparable LED upgrade, contact us and we’ll point you to the right product in our range.

Why IP67 sealing and voltage range matter

IP67 sealing: Tractor headlight housings sit exposed to mud, rain and pressure washing every day. An IP67 rating means both lamps in this set are fully sealed against dust ingress and can handle temporary submersion, so moisture doesn’t creep in and fog the lens over time.

10-32V input range: Older John Deere tractors run on either 12V or 24V electrical systems depending on the model and generation. A wide input range means this set works reliably on both without needing a separate converter.

Frequently asked questions

Why choose this CRAWER LED headlight pair for John Deere at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

Fitting both sides at once keeps the light output matched left to right, with no mismatch between an older halogen unit and a new LED. Order the pair today and upgrade your John Deere R or M Series in one go.