CR-1054 – CRAWER 60W built-in LED work light

No products in the cart.

High-Performance

Purpose Built

3 Year Warranty

Work Lights

CRAWER 60W built-in LED work light

Specifications

Dimensions	183.8 × 75 × 101.4 cm
Brand	CRAWER
Beam Angle	40°
Colour Temp	5500K
Electrical Protection	Radio frequency interference free I CISPR 25 class 4
Finish	Powder-coated aluminum
Harness Connector	Deutsch DT 2-pin
Input Voltage	9-32V
IP Rating	IP67
Lumens	7000
Output	60W

Product information

The CR-1054 is a 60W LED work light designed for Case, Fendt, Massey Ferguson machinery. It uses the Deutsch DT 2-pin connector, so it installs without cutting or splicing into the existing loom.

With 7000 lumens, a 40° pattern, IP67 sealing, a 9-32V input range, this light is suited to yard work, headland turns and low-light field work. (See all work lights by clicking here)

Dimensions and installation

Harness connector: Deutsch DT 2-pin
Input voltage: 9-32V
Housing finish: Powder-coated aluminum
Mounting dimensions and bolt spacing:
Height:101.4mm
Width:183.8mm
Depth:75mm
Bolt Spacing:162.5mm

Tip: always check your existing mounting holes and connector type before ordering a replacement light.

Compatibility

This light is designed for Case, Fendt, Massey Ferguson machinery fitted with a matching Deutsch DT 2-pin connector. Always confirm your model uses this connector type before ordering.

Also suitable for other machines?

This unit is fitted out for Case, Fendt, Massey Ferguson machinery specifically, using its factory-style connector and mounting position. It is not intended as a universal fit.

If you’re running a different make and want a comparable LED upgrade, contact us and we’ll point you to the right product in our range.

Why IP67 and CISPR Class 4 protection matter

IP67: Dust and moisture get into unsealed housings on rough, vibrating machinery. IP67 keeps the electronics protected in wash-downs, rain and dusty paddock conditions, so the light keeps working instead of fogging up or corroding from the inside.

Radio frequency interference protection: Radio frequency interference free I CISPR 25 class 4 means the driver’s circuitry won’t pick up static or crackle on the cab radio or two-way when the light is running — a common complaint with uncertified LED lights.

Frequently asked questions

Will this light fit my tractor without cutting any wires? ?

It uses the Deutsch DT 2-pin connector, so in most cases it plugs straight into the existing loom without cutting or splicing.

Is it safe to run on a 12V or 24V electrical system? ?

Yes — the input range is 9-32V, which covers both 12V and 24V agricultural electrical systems.

Is the CR-1054 waterproof? ?

Yes, it’s rated IP67, so it’s built to handle rain, wash-downs and dusty paddock conditions.

Will it interfere with my cab radio or two-way? ?

No. All CRAWER work lights, including this one, are CISPR Class 4 rated for radio frequency interference protection.

Why choose this CRAWER 60W built-in LED work light at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-1054 gives you a direct, CISPR-certified LED upgrade without the guesswork of matching aftermarket wiring. Order today for reliable light output on your Case, Fendt, Massey Ferguson.