No products in the cart.

High-Performance
Purpose Built
3 Year Warranty
Headlights

CRAWER Universal Rectangular LED Headlight Pair

CRAWER Universal Rectangular LED Headlight Pair

Specifications

Brand

CRAWER

Headlight Functions

High Beam, Low Beam

Colour Temp

5500K

Electrical Protection

Radio frequency interference free I CISPR 25 class 4

Finish

Powder-coated aluminum

Input Voltage

10-32V

IP Rating

IP67

Output

30W High Beam, 60W Low Beam

CRAWER Universal Rectangular LED Headlight

Brand

CRAWER

Headlight Functions

High Beam, Low Beam

Colour Temp

5500K

Electrical Protection

Radio frequency interference free I CISPR 25 class 4

Finish

Powder-coated aluminum

Harness Connector

3 Core Cable (40cm)

Input Voltage

10-30V

IP Rating

IP67

Output

30W High Beam, 60W Low Beam

Product information

This set includes 2 CRAWER rectangular LED headlights, combining low beam and high beam in one compact surface-mount unit. Each headlight runs on an open-ended 3-wire cable, so you only need the connector that matches your machine. The bracket can be flipped to the opposite side, so the headlight never hangs upside down.

With a 10–32V input, IP67 sealing, CISPR Class 4 suppression and E-mark approval (R10, R112), these headlights suit a wide range of tractors and agricultural machinery — a straightforward upgrade for older machines without factory LED headlights.

(See all headlights by clicking here)

Dimensions and installation

  • Width: 160 mm
  • Height: 113 mm
  • Depth: 96 mm
  • Cable: 40 cm, 3-wire, open end

Tip: the bracket can be mounted on either side — check which orientation keeps the beam pattern the right way up before drilling.

Compatibility

This headlight pair suits machines using a 10–32V electrical system and standard surface-mount brackets. It is commonly fitted to John Deere, Case and New Holland tractors, though the bracket also allows mounting on the cab pillar or roof of most agricultural machines.

Because it is based on a universal bracket and standard voltage range rather than brand-specific fittings, it can be used across various agricultural and off-road vehicles where these criteria match.

Also suitable for other machines?

Yes, as long as the 10–32V system and mounting space match. Always check the available bracket space and wiring before installation.

If in doubt, contact us for advice.

Why E-mark approval and CISPR Class 4 matter

E-mark approval (R10, R112):
These headlights carry E9 type-approval under ECE R10 and R112, so both beam functions are certified for public road use — important if the machine travels between paddocks or job sites on the road.

CISPR Class 4 interference suppression:
Class 4 suppression stops the LED drivers from interfering with GPS receivers, two-way radios and onboard electronics — a common issue with unsuppressed aftermarket LED units.

Frequently asked questions

Can I fit these headlights myself?
Yes. Each headlight has an open-ended 3-wire cable, so you just need a connector that matches your tractor’s existing plug.
Do these headlights interfere with my radio or GPS?
No. They are built to CISPR Class 4, so they will not cause interference with onboard radios, GPS or electronics.
Are these headlights road legal?
Yes, they carry E-mark approval under ECE R10 and R112 for high and low beam.
Can I mount the bracket on either side?
Yes, the bracket can be flipped to the opposite side so the headlight stays the right way up regardless of mounting position.
[sc_fs_multi_faq
headline-0=”h3″ question-0=”Can I fit these headlights myself?” answer-0=”Yes. Each headlight has an open-ended 3-wire cable, so you just need a connector that matches your tractor’s existing plug.”
headline-1=”h3″ question-1=”Do these headlights interfere with my radio or GPS?” answer-1=”No. They are built to CISPR Class 4, so they will not cause interference with onboard radios, GPS or electronics.”
headline-2=”h3″ question-2=”Are these headlights road legal?” answer-2=”Yes, they carry E-mark approval under ECE R10 and R112 for high and low beam.”
headline-3=”h3″ question-3=”Can I mount the bracket on either side?” answer-3=”Yes, the bracket can be flipped to the opposite side so the headlight stays the right way up regardless of mounting position.”
count=”4″ html=”true”]

Why choose this CRAWER Universal Rectangular LED Headlight Pair at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

This rectangular headlight pair is a straightforward, budget-friendly way to bring E-marked LED lighting to older machines. Order the set today and fit both sides in one go.

$319.61 AUD

$290.55 excl. GST

In stock

Part number: Part Nr.: CR-3017S

Contents of bundle

Product image

CRAWER Universal Rectangular LED Headlight x 2

In stock
Add to cart

Built for Farmers, by Farmers

Unmatched Support & Reliability

Powerful Performance, Plug & Play Convenience

$319.61

In stock