CRAWER 60W Oval LED Work Light for John Deere R Series, Spot Beam

This oval LED work light is a direct replacement for the factory halogen work lights fitted to John Deere R Series tractors, plugging straight into the original 9005/9006 harness connector already on the machine. No cutting or splicing is required — the light bolts onto the existing mounting point and connects in minutes.

With a 40° spot beam and 6500 lumens of measured output, the CR-1015-40 throws light further forward than the original factory lamp, making it well suited to header transport, road travel and any job where you need to see well ahead of the machine at higher travel speeds.

(See all work lights by clicking here)

Dimensions and installation

• Shape: Oval, powder-coated aluminium housing
• Harness connector: 9005/9006 (plug-and-play into the factory socket)
• Mounting: uses the existing John Deere R Series roof bracket — no drilling required

Tip: confirm your tractor still has the factory 9005/9006 socket before ordering, as some earlier R Series units were fitted with a different connector.

Compatibility

Designed for John Deere R Series tractors fitted with the factory oval work light housing and 9005/9006 connector.

Because it uses a widely-used harness connector, the same housing style is also found on several other tractor brands — if you are not sure your machine has this connector, check the plug on your existing work light or contact us before ordering.

Also suitable for other machines?

Yes, as long as your machine uses the same oval housing and 9005/9006 connector. Several other tractor brands share this fitting, but always check the plug and mounting hole spacing before installation.

If in doubt, contact us for advice.

Why IP67 sealing and CISPR Class 4 matter

IP67 sealing:
Work lights live on the roof or cab, exposed to rain, dust and pressure washing. An IP67 rating means the CR-1015-40 is fully sealed against dust ingress and can handle temporary submersion, so moisture will not reach the LED chips or wiring even after a season of hard field use.

CISPR Class 4 radio frequency protection:
Unshielded LED lights can interfere with GPS guidance, two-way radios and onboard electronics. CISPR Class 4 certification confirms this light has been tested and suppressed against radio frequency interference, so it will not disrupt precision farming equipment or in-cab electronics.

Frequently asked questions

Why choose this CRAWER LED work light at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-1015-40 gives you nearly three times the light output of a typical factory halogen unit while dropping straight into the existing wiring and mounting bracket — a same-day upgrade with no rewiring required. Order today and get more usable light on your John Deere R Series this season.