CRAWER 60W Rectangular LED Work Light, Spot Beam

Specifications

Weight	1.48 kg
Dimensions	23 × 13 × 12.5 cm
Brand	CRAWER
Beam Angle	40° Spot Beam
Colour Temp	6000K
Electrical Protection	Radio frequency interference free I CISPR 25 class 4
Harness Connector	Deutsch DT 2-pin
Finish	Powder-coated aluminum
Input Voltage	10-32V
IP Rating	IP67
Lumens	6500
Output	65W

Product information

The CRAWER 60W Rectangular LED Work Light is a versatile bolt-on upgrade suited to Case, Fendt, John Deere, Massey Ferguson, New Holland and Valtra tractors. Its 6000K cool white LEDs deliver 6500 lumens across a narrow 40° spot beam, throwing light further out for long-range visibility.

Running on a 10-32V input through a Deutsch DT 2-pin connector, the light wires in cleanly with no cutting or splicing required. The powder-coated aluminium housing is rated IP67 and CISPR 25 Class 4 certified, keeping it sealed and free of interference with onboard electronics.

(See all Work Lights by clicking here)

Dimensions and installation

Length: 23 cm
Width: 13 cm
Height: 12.5 cm
Connector: Deutsch DT 2-pin

Tip: check your existing bracket and mounting space against these dimensions before ordering.

Compatibility

This light is built as a general-purpose bolt-on unit, suiting Case, Fendt, John Deere, Massey Ferguson, New Holland and Valtra tractors that use a standard rectangular work light mount and Deutsch DT 2-pin wiring.

Because it’s based on this widely-used standard fitting, it suits a broad range of machines across these six brands without needing brand-specific adapters.

Also suitable for other machines?

Yes — as long as your mounting bracket and wiring match a standard rectangular work light with a Deutsch DT 2-pin connector, this light is a straightforward fit regardless of make or model.

If you’re unsure whether your setup matches, contact us before ordering.

Why IP67 sealing and CISPR 25 Class 4 matter

IP67 sealing:
Work lights bolted onto the cab or bonnet cop the full brunt of rain, dust and washdown. An IP67 rating means the housing is fully dust-tight and can handle temporary submersion, so moisture doesn’t creep in and shorten the light’s working life.

CISPR 25 Class 4:
Modern tractors rely on sensitive onboard electronics for guidance, engine management and cab controls. CISPR 25 Class 4 certification confirms this light won’t generate radio-frequency interference that could disrupt those systems.

Frequently asked questions

Will this fit my Case, Fendt, John Deere, Massey Ferguson, New Holland or Valtra tractor?

Yes, as long as your tractor uses a standard rectangular work light mount with a Deutsch DT 2-pin connector, it’s a direct, plug-and-play fit across these brands.

What beam pattern does this light produce?

It’s a 40° spot beam at 6000K cool white, throwing light further out for long-range visibility.

Is it waterproof enough for outdoor field use?

Yes, it’s rated IP67, meaning it’s fully dust-tight and protected against temporary submersion in water.

Does it cause radio or electronics interference?

No. It’s CISPR 25 Class 4 certified, meaning it’s tested to stay clear of interfering with onboard tractor electronics.

Why choose this CRAWER 60W Rectangular LED Work Light at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

One light, six brands covered — a versatile, factory-style upgrade for Case, Fendt, John Deere, Massey Ferguson, New Holland and Valtra. Order today for a straightforward plug-and-play swap.

$145.00 AUD

$131.82 excl. GST

In stock

Part number: Part Nr.: CR-1007