CRAWER 55W Square LED Work Light, Flood Beam 90

This square surface-mount LED work light is a direct swap for the square Hella Ultrabeam work lights fitted to Fendt Vario tractors. It reuses the original mounting bracket (a spare bracket is included in the box) and connects via a Deutsch DT 2-pin plug, so swapping over is an unbolt-and-reconnect job with no cutting or splicing.

With a 55W input delivering 6500 real lumens through a 90° Flood Beam, it gives a very wide, short-throw flood right around the machine — useful for cab and implement-mounted lighting where broad close-in coverage matters. A 9-32V input and IP67 sealing cover 12V and 24V machines in wet, dusty conditions, and the same bracket and connector also fit Case, Claas, Deutz, John Deere and Valtra equipment using this mounting.

(See all work lights by clicking here)

Dimensions and installation

• Width: 112.5 mm
• Height: 101 mm
• Depth: 81 mm
• Bracket bolt spacing: 41.5 mm
• Harness connector: Deutsch DT 2-pin
• Cable: 300 mm pigtail supplied

Tip: the original Hella Ultrabeam bracket can usually be reused as-is — a spare bracket ships in the box in case yours needs replacing.

Compatibility

Designed as a direct swap for the square Hella Ultrabeam work lights on Fendt Vario tractors, using the factory bracket and Deutsch DT 2-pin plug. Because it’s based on this same bracket and connector, it’s also fitted on Case, Claas, Deutz, John Deere and Valtra equipment using the same bracket.

If you’re unsure whether your machine takes this bracket, contact us before ordering.

Also suitable for other machines?

Yes — as long as the 41.5 mm bracket bolt spacing and Deutsch DT 2-pin connector match your machine, it isn’t limited to the brands above. Contact us if you’re unsure.

Why IP67 sealing and CISPR Class 4 protection matter

IP67 sealing:
Surface-mounted work lights are exposed to dust, mud and water thrown up from wheels and implements. IP67 sealing keeps moisture and grime out of the housing, so the connector and LED board keep working through wash-downs and wet fieldwork.

CISPR Class 4 protection:
Work lights sit close to cab electronics, radios and GPS/guidance receivers. CISPR 25 Class 4 certification means the light is tested not to cause radio frequency interference with this equipment, even on modern tractors.

Frequently asked questions

Why choose this CRAWER LED work light at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-1022-90 drops straight onto your Fendt Vario’s existing Hella Ultrabeam bracket — spare bracket included — for a clean, plug-ready upgrade with a 90° flood beam. Order today for reliable, radio-quiet lighting built for daily use.