CRAWER 40W Round LED Cornerlight for Fendt S4

This round LED work light drops straight into the factory corner-post recess used on Fendt S4 tractors, and fits the equivalent round inbuilt cutout on Deutz machines. No cutting or splicing is needed — the light sits flush in the existing recess and connects through its H9 plug.

With 3600 real lumens from a 40W input, a 60° flood beam and 6000K white light, it lifts visibility around the front corners of the cab. A 10-30V input and IP67 sealing cover both 12V and 24V machines in wet, dusty conditions, and because it’s built to a standard round inbuilt size, the same light is also fitted on John Deere, New Holland, Massey Ferguson, Case, Claas and Valtra machines wherever this recess size is used.

(See all work lights by clicking here)

Dimensions and installation

• Diameter: 85 mm
• Mounting depth: 69 mm
• Harness connector: H9
• Input voltage: 10-30V

Tip: measure your existing recess against the 85 mm diameter and 69 mm mounting depth before ordering. On newer Fendt Gen6 and Fendt ONE tractors this light can trigger a CAN-bus fault message on the dash — a compatible resistor/decoder module resolves this, so contact us first if your tractor runs Gen6 or Fendt ONE electronics.

Compatibility

Designed as a round inbuilt cornerlight for Fendt S4 tractors and the matching round mounting point on Deutz machines. Because it uses a standard round inbuilt size rather than a brand-specific bracket, it’s also fitted on John Deere, New Holland, Massey Ferguson, Case, Claas and Valtra machines that use the same recess.

If you’re unsure whether your machine takes this size, contact us before ordering.

Also suitable for other machines?

Yes — as it’s a standard round inbuilt size rather than one specific bracket, always confirm the 85 mm diameter and 69 mm depth against your machine before ordering. Contact us if in doubt.

Why IP67 sealing and CISPR Class 4 protection matter

IP67 sealing:
A corner-mounted light sits low and exposed to dust, mud and water thrown up from the front wheels. IP67 sealing keeps moisture and grime out of the housing, so the connector and LED board keep working through wash-downs and wet fieldwork.

CISPR Class 4 protection:
This corner position sits close to the cab electronics and radio antenna. CISPR 25 Class 4 certification means the light is tested not to cause radio frequency interference with the tractor’s radio or other onboard electronics.

Frequently asked questions

Why choose this CRAWER LED cornerlight at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-1024 gives your Fendt S4, Deutz or compatible machine an extra flood of light exactly where the factory recess leaves a gap, without cutting into the existing wiring. Order today for a clean, plug-ready corner light upgrade.