CRAWER Hyperios Series LED Headlight Pair – High Beam

This pair of CRAWER Hyperios 90mm LED headlights provides dedicated high beam lighting, built as a direct replacement for the original Hella halogen units used on Fendt, Claas, Massey Ferguson and Valtra tractors. The 9005/9006 connector plugs straight into the original loom, with an H7-to-9005 adapter available where the factory headlight runs an H7 bulb.

With a 9-32V input, IP67 sealing and full E-mark approval (R112/R10), the CR-3008 delivers 25W of symmetric, cold white 6000K light for a strong beam on the road or in the paddock at night. The 90mm housing works equally well mounted on the bonnet or the roof.

(See all headlights by clicking here)

Dimensions and installation

• Diameter: 90 mm
• Depth: 106 mm
• Bolt spacing: 84.9 mm, centre-to-centre
• Connector: 9005/9006 (H7-to-9005 adapter available for Claas/Fendt bonnet mounts)

Tip: a 2-pin connector for the optional CR-RES02 CAN-bus resistor is built in — only fit the resistor if your dash shows an error code after installing the lamps.

Compatibility

Designed for Fendt 800 and 900 SCR series, Claas Celtis, Nectis, Elios, Axos, Atos, Arion and Axion ranges, Massey Ferguson 5600–8700 series, and Valtra cab-mounted applications using a 9005 connector.

• Fendt: 800 series SCR, 900 series SCR
• Massey Ferguson: 5600 / 5700 / 6600 / 6700 / 7600 / 7700 / 8600 / 8700
• Claas: Celtis, Nectis, Elios, Axos, Atos, Arion, Axion
• Valtra: cab-mounted units with 9005 connector (H9-to-9005 adapter required)

OEM references: Hella 008193027, Massey Ferguson 4352924M3 / 4352924M2 / B69383, Claas 0011064011.

Also suitable for other machines?

Yes. Because this pair is built around the common 90mm housing and 9005/9006 connector, it also fits other tractors and self-propelled machines using the same mounting size, beyond the brands listed above.

If you are unsure whether it suits your machine, contact us and we will help you confirm the fit.

Why E-mark approval and IP67 matter

E-mark approval (R112/R10): A high beam that is not E-marked is not legal for on-road use. This lamp carries R112/R10 approval, so it is road-legal across the EU standard your machine was built to, giving you full high beam output without a compliance headache.

IP67 sealing: High beams often sit exposed at the front of the machine, taking the brunt of mud, rain and pressure washing. IP67 sealing keeps moisture and dust out of the housing so the lamp keeps performing season after season.

Frequently asked questions

Why choose this CRAWER Hyperios LED High Beam Headlight Pair at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-3008S gives you a genuine high beam upgrade without touching your tractor’s wiring. Combine it with the CR-3007S low beam set for a complete Hyperios LED headlight conversion front to back.