No products in the cart.

High-Performance
Purpose Built
3 Year Warranty
Work Lights

CRAWER 48W Universal LED Work Light 4600 Lumen

CRAWER 48W Universal LED Work Light 4600 Lumen

Specifications

Brand

CRAWER

Beam Angle

60° Flood Beam

Colour Temp

6500

Electrical Protection

Radio frequency interference free I CISPR 25 class 4

Finish

Powder-coated aluminum

Harness Connector

2 Core Cable (1.5m)

Input Voltage

10-32V

IP Rating

IP67

Lumens

4600

Output

48W

Product information

This 48W square LED work light produces 4600 lumens, making it one of the brighter universal work lights in the CRAWER range. Finished in powder-coated aluminium for extra protection against corrosion, it is built as a direct upgrade for any machine using a standard square work light rather than a specific tractor brand.

With a wide 10–32V input and a 60° flood beam, the CR-4048 spreads a broad, even pool of light across the work area — useful for loader work, night-time paddock work or any task where you need to see a wide area rather than a narrow spot.

(See all work lights by clicking here)

Dimensions and installation

  • Cable: 1.5 m 2-core pigtail
  • Housing: powder-coated aluminium, square
  • Mounting: supplied bracket, suits standard square work light mounting points
  • Width: 108mm
  • Height: 117mm (excl. bracket)
  • Depth: 72mm
  • Bracket width incl. nuts: 75mm
  • Bracket depth: 30mm
  • Light height incl. bracket: 140mm

Tip: check your existing bracket and available space before ordering, since this is a universal-fit light rather than a brand-specific replacement.

Compatibility

This work light is suitable for machines using a standard square work light mount and a 10–32V electrical system, which covers the large majority of tractors, harvesters and construction equipment on 12V and 24V circuits.

Because it is based on standard dimensions rather than a specific tractor brand’s fittings, it can be used across a wide range of agricultural and off-road vehicles wherever a square work light with a 2-core connection is fitted.

Also suitable for other machines?

Yes, as long as the mounting size and electrical requirements match. This light is not tied to a single tractor brand, so it works equally well on harvesters, telehandlers, and other machinery running a 10–32V system.

If in doubt, contact us for advice.

Why IP67 sealing and CISPR Class 4 matter

IP67 sealing:
An IP67 rating means the housing is fully dust-tight and can withstand temporary submersion in up to 1 metre of water. For a light mounted low on a loader arm or exposed to heavy wash-downs and rain, that level of sealing is the difference between years of reliable use and an early failure.

CISPR Class 4 radio interference protection:
This is the strictest agricultural EMC classification, confirming the light has been tested not to generate electrical noise that interferes with in-cab radios, GPS or other electronics — important on modern tractors packed with sensitive systems.

Frequently asked questions

Will this light fit my machine?
Yes — the CR-4048 is a universal-fit square work light suited to any machine using a standard square work light bracket and a 10–32V system.
How waterproof is it?
It is rated IP67, meaning it is fully dust-tight and can handle temporary submersion in up to 1 metre of water.
Will it interfere with my radio or electronics?
No. It is certified to CISPR Class 4, so it will not cause radio or electronic interference on your machine.
What cable length is included?
The CR-4048 comes with a 1.5 m 2-core pigtail cable ready for wiring into your existing harness.
[sc_fs_multi_faq
headline-0=”h3″ question-0=”Will this light fit my machine?” answer-0=”Yes – the CR-4048 is a universal-fit square work light suited to any machine using a standard square work light bracket and a 10-32V system.”
headline-1=”h3″ question-1=”How waterproof is it?” answer-1=”It is rated IP67, meaning it is fully dust-tight and can handle temporary submersion in up to 1 metre of water.”
headline-2=”h3″ question-2=”Will it interfere with my radio or electronics?” answer-2=”No. It is certified to CISPR Class 4, so it will not cause radio or electronic interference on your machine.”
headline-3=”h3″ question-3=”What cable length is included?” answer-3=”The CR-4048 comes with a 1.5 m 2-core pigtail cable ready for wiring into your existing harness.”
count=”4″ html=”true”]

Why choose this CRAWER 48W LED work light at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

At 4600 lumens, the CR-4048 is one of the brighter square work lights in our range, and the powder-coated housing gives it extra protection for machines that spend most of their life outdoors. Order today for a straightforward, plug-ready upgrade.

$99.95 AUD

$90.86 excl. GST

In stock

Part number: Part Nr.: CR-4048

Add to cart

Built for Farmers, by Farmers

Unmatched Support & Reliability

Powerful Performance, Plug & Play Convenience

$99.95

In stock