CRAWER 40W Round LED Work Light, Flood Beam

This round LED work light delivers a wide 60° flood beam, spreading light evenly around the machine instead of a narrow spot. It connects via a Deutsch DT 2-pin plug for a straightforward fit, and replaces the earlier CRW3030 round work light with a tougher housing and improved seal against moisture.

With 4500 lumens from a 40W draw, it covers the work area evenly rather than creating a hard-edged hotspot – useful around the yard, when loading, feeding stock or doing maintenance after dark. The powder-coated aluminium housing and IP68 sealing keep out dust and water under constant vibration, and CISPR Class 4 protection means it won’t interfere with GPS, radio or onboard electronics.

(See all work lights by clicking here)

Dimensions and installation

• Diameter: 90 mm
• Height including bracket: 120 mm
• Depth: 70 mm
• Harness connector: Deutsch DT 2-pin

Tip: check the connector fitted to your machine before ordering – older models using a different, legacy-style plug will need a separate adapter cable.

Compatibility

This work light is built around a 9-32V electrical system and a Deutsch DT 2-pin connector, which makes it suitable for a wide range of agricultural machinery, including Claas, Deutz and New Holland tractors.

• Newer models: plug straight in via the Deutsch DT 2-pin connector
• Older models with a different connector: require a separate adapter cable

Also suitable for other machines?

Yes. Because it’s based on a standard 9-32V system and connector rather than a brand-specific fitting, this light can be used on other agricultural machines with a matching electrical setup, not only the brands listed above.

If in doubt, contact us before ordering.

Why CISPR Class 4 and IP68 matter

CISPR Class 4 electrical protection:
Agricultural machinery often runs GPS, two-way radios and onboard computers off the same electrical system as the lighting. CISPR Class 4 certification confirms the light won’t disrupt those systems when switched on.

IP68 sealing:
A yard or paddock environment means constant exposure to dust, rain and washdown. IP68 sealing keeps moisture and grit out over the long term, which matters for a light mounted outside in all conditions.

Frequently asked questions

Why choose this CRAWER round LED work light at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The CR-1055-60 pairs a wide 60° flood beam with IP68 sealing and CISPR Class 4 protection, holding up to yard and paddock conditions without interfering with your onboard electronics. Order today for plug-and-play installation on Claas, Deutz and New Holland machinery.