LED Warning Panel Set Front & Rear Lights 7.5m Cable

This warning panel set includes two square, double-sided panels in galvanised steel, each fitted with a front position light and a rear light combining position, stop and turn signal functions. The panels connect through a 7-pin plug and run off a 7.5 metre cable, with waterproof connectors feeding each light — no cutting or splicing required.

Each panel measures 423 × 423 mm, with the rear light unit at 112 × 107 mm. Built to IP67 and rated for a 10-30V system, the set suits wide trailers, machinery and oversized farm equipment needing extra width markers for road visibility.

(See all tail & marker lights by clicking here)

Dimensions and installation

• Panel width: 423 mm
• Panel height: 423 mm
• Rear light unit: 112 mm × 107 mm
• Cable: 7.5 metre pigtail from the 7-pin plug to the panels
• Connectors: waterproof connectors for both the front position light and the rear light

Tip: measure the available mounting width on your trailer or machine and check for an existing 7-pin socket before ordering.

Compatibility

This set is suitable for any trailer or machine wide enough to need extra visibility markers, using a standard 7-pin plug connection. Because it is based on a universal harness rather than brand-specific fittings, it fits a wide range of agricultural trailers, implements and oversized machinery.

Also suitable for other machines?

Yes, as long as the machine has (or can be fitted with) a 7-pin socket and enough width to mount two 423 × 423 mm panels. Check the available mounting space and existing wiring before ordering.

If in doubt, contact us for advice.

Why Finish and IP Rating matter

Galvanised steel housing:
Wide trailers and oversized equipment spend long hours in rain, dust and vibration. A galvanised housing resists corrosion and holds up to knocks better than painted steel or plastic.

IP67 sealing:
The light units and connectors are sealed to IP67, protected against dust and temporary submersion — useful on wide equipment where the panels sit low and can be splashed during transport.

Frequently asked questions

Why choose this CRAWER LED Warning Panel Set (Front & Rear) at Wattz?

We specialise in LED lighting for agricultural machinery and help you choose the right solution for your setup. Read our customer feedback on Google.

The RF59315-75L pairs two robust galvanised panels with sealed front and rear lighting in one plug-and-play kit, saving you from sourcing panels and lights separately. Order today to add clear width markers to your wide trailer or implement.